MAG9002™ Lightweight backpack cutting system
An hour of cutting or cutting and a breathing apparatus
Weighing in at a fractional 26 pounds, this featherweight backpack cutting system can be taken almost anywhere to cut almost any material in seconds. Consider the possibilities of an hour of continuous cutting to melt through ferrous and nonferrous materials in seconds.
The system uses safe consumables that can only burn using pressurized oxygen driven through their center once ignition has taken place. Our unwrapped flame cutting tubes come in both 18" and 36" lengths for cutting, gouging or piercing in any position.
Tubes can be easily bent for access to difficult cutting areas often minimizing dismantling time. The longer flame tubes are a favorite among heavy equipment personnel for piercing and removing pins. With no preheating, the focused particle stream can burn through rust, scale, paint, slag and even limited layers of concrete.
Ships with the following:
- 3000 psi composite oxygen cylinder. (2)
- Popular CGA540 cylinder valve size. (2)
- Preset 150 psi oxygen regulator. (2)
- Cutting torch with thumb valve.
- Oxygen hose with quick disconnect.
- Alice backpack with cylinder straps.
- Deluxe 12 volt ignition system.
- Flame cutting tubes. (50)
- Flame tube torch head extender.
- Additional reserve collets.
- Gloves and shade 5 glasses.
- Pelican heavy duty carry case.
- Instructional CD.
- Universal float charger with adapter.
- Weight: Approximately 110 lbs.
Heavy duty Pelican case with reinforced lock guides, seven latches, custom foam, custom zipper compartments, wheels, lift handles and a telescopic pull handle. Pelican cases are military approved.
We ship domestically UPS or internationally via an air carrier or freight forwarder of your choice. Recently Magnum sold 25 units to a rescue unit in Indonesia. The lightweight style and power is a valuable asset for emergency response.
Our deluxe ignition comes with many extra features. The battery can accommodate laptops, cell phone chargers, work lights and more. It comes with jumper cables for equipment and a float charger. Finally, the ignition ships with prongs and cable igniter heads. Strong and reliable in challenging field conditions. More.
Photo with "Y" oxygen connector to main hose.
Gauges, valvesw and regulators shown on cylindes.
Photo of quick disconnect on base of cutting torch.
Customers purchasing this item frequently purchase additional cylinders for emergency reserve.
|
